BPDRD - E-232, ELMER'S WATERPROOF GLUE-RESIN PART 1

  • MSDS: BPDRD
  • Manufacturer: BORDEN INC
  • Product Name: E-232, ELMER'S WATERPROOF GLUE-RESIN PART 1
  • National Stock Number: 8040-00N030128
Product Identification

Product ID:E-232, ELMER'S WATERPROOF GLUE-RESIN PART 1
MSDS Date:12/11/1986
FSC:8040
NIIN:00N030128
Kit Part:Y
MSDS Number: BPDRD

Responsible Party
BORDEN INC
180 EAST BROAD ST
COLUMBUS, OH 43215
US

Emergency Phone: 614-431-6600

Info Phone: 614-431-6680

Cage: 07982

Contractor
BORDEN INC
208 COLUMBUS, OH 43215-3705 US

Telephone: 614-225-6124

Cage: 07982

Ingredients

ETHYL ALCOHOL; (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 15-30%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


RESORCINOL

CAS: 108-46-3

RTECS: VG9625000

Fraction By Weight: 1-5%

OSHA PEL 10 PPM;20 PPM STEL

ACGIH TLV: 10 PPM;20 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CONTROL TECHNIQUES MAY BE USED TO EFFECTIVELY

RTECS: 9999999ZZ


ENCLOSED SYS DESIGN. PROCESS ISOLATION & REMOTE

RTECS: 9999999ZZ


EQUIP & PRUDENT WORK PRACTICES. THESE TECHNIQUES MAY

RTECS: 9999999ZZ


YOUR OPS. WE, THERFORE, RECOMMEND THAT YOU CONSULT

RTECS: 9999999ZZ


PROGRAMS ARE ADEQUATE.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN ABSORPTION: NOT EXPECTED
TO BE HARMFUL UNDER NORMAL CONDITIONS OF USE. INGEST: MAY BE
HARMFUL IF SWALLOWED. INHAL: MAY BE HARMFUL IF INHALED. LIQ OR
VAPOR CAN CAUSE IRRITATION OF NOSE, THR OAT AND LUNGS. SKIN: MAY
CAUSE IRRITATION ON PROLONGED OR REPEATED CONTACT. EYES: CAUSES
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MAY INCLUDE HEADACHE, DIZZINESS, NAUSEA,
VOMITING AND DROWSINESS. CAN CAUSE CENTRAL NERVOUS SYSTEM
DEPRESSION. MAY CAUSE THYROID DAMAGE BASED ON TESTS WITH LAB
ANIMALS. MAY CAUSE ALLERGIC SKIN REACTIO N.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN ABSORP:IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15
MIN. INGEST:IF ACCIDENTALLY SWALLOWED, DILUTE BY DRINKING LG QTYS
OF WATER. IMMED CONT POIS CNTRL CNTR/HOSPITAL EMER ROOM FOR ANY
OTHER ADDITI ONAL TREATMENT DIRECTIONS. INHAL: REMOVE TO FRESH AIR.
IF NOT BRTHG, GIVE ARTF RESP PREF MOUTH TO MOUTH IF BRTHG IS DFCLT,
GIVE O*2. CALL MD. SKIN CONT:IN CASE OF IRRIT, FLUSH W/WATER. (SUPP
DATA)

Fire Fighting

Flash Point Method:TOC
Flash Point:110F,43C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, "ALCOHOL" FOAM OR
CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . KEEP AWAY FROM HEAT AND FLAME. USE WATER TO
KEEP FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP WITH
ABSORBENT MATERIAL AND REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NOT HARMED BY FREEZING, BUT THAW
FROZEN RESIN SLOWLY AND STIR BEFORE USING. STORE IN A COOL DRY
PLACE. KEEP CONTAINER CLOSED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:WHERE AIR CONTAMINANTS CAN EXCEED ACCEPTABLE
CRITERIA. USE NIOSH/MSHA APPRVD RESP PROT EQUIP. RESPIRATORS SHOULD
BE SELECTED BASED ON FORM & CONC OF CONTAMINANTS IN AIR I/A/W OSHA
29 CFR 1910.134/OTHE R APPLICABLE STANDARDS/GUIDELINES.
Ventilation:IF AIRBORNE CONTAMINANTS ARE GENERATED WHEN MATL IS
HEATED/HANDLED, SUFFICIENT VENT IN VOL & AIR FLOW (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:EYE: IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN.
LIDS SHLD BE HELD APART DURING IRRIGATION TO INSURE WATER CONT
W/ENTIRE SURF OF EYES & LIDS. CALL MD. VENT:PATTERNS SHLD BE PROVI
DED TO KEEP AIR CONTAMINANT CONC LVLS ENGINEERING CONTROLS:THE FOLLOWING EXPOS (ING 3)

Chemical Properties

HCC:F4
Spec Gravity:1.15
Appearance and Odor:RED-BROWN LIQUID; MILD ALCOHOL ODOR.
Percent Volatiles by Volume:45

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
OF ACCORDING TO LOCAL, STATE AND FEDERAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.